Vision Spinner 2 Vape Bundle

Vision Spinner 2 Bundle Full Details

• This bundle combines one of the highest capacity 510/eGo variable voltage batteries available, along with the high quality Kanger T3S clearomizer to create one of our most popular and powerful kits. Enjoy a strong vape without having to worry about charging for hours on end.
• The Kanger T3S uses the original Kanger Dual Coil Replacements

• Output Voltage:

  3.3V – 4.8V

• Battery capacity:

  1650mah

• Battery Life:

  2 – 3 days (approximately)

• Threading:

  510 and eGo compatible

• Clearomizer capacity:

  2.8ml

• Clearomizer resistance:

  1.8ohms

• USB charger output:

  4.2V

• Charge Time:

  4 – 6 hours (approximately)

• Short Circuit Protection:

  When a short circuit happens, the button will flash 3 times and the battery will shut down and not function again until short circuit is removed

• Safety Cutoff/Atomizer Protection:

  If you hold the button for 8 seconds, the battery will flash 5 times and stop until the next press.

• Simple to use:
• 5 click on / off button
• Assembled E-cigarette Size:

  195mm x 15mm x 15mm

• Package Dimensions:

  160mm x 80mm x 25mm

• Package Weight:

  0.130kg

• Package Contents
• 1 x Vision Spinner 2 Battery 1650mah
• 1 x Kanger T3S Clearomizer
• 1 x USB Charging Cable
• +
• 1 x Free 10ml Hangsen Cherry flavour 12mg e-liquid

Vision Spinner 2 Bundle Instructions

• Kanger T3S Clearomizer :
• 1. To fill with e-liquid, unscrew the base of the clearomizer so that is is detached from the mouthpiece and cylindrical tank.
• 2. Carefully using the e-liquid syringe tip, fill the outside rim of the clearomizer whilst it is up-side down. Do not fill more than the 2.8ml capacity.
• 3. Whilst still holding the mouthpiece up-side down, re-screw the base of the clearomizer so that it is tight and secure.
• 4. Once the liquid is securely contained, and the T3S clearomizer re-assembled, we can then hold it upright and attach it to the battery, ready for use.
• 
• Vision Spinner 2 Battery :
• Power on the e-cigarette device by pressing the main power button 5 times, and the same to turn it off.
• 
• The Vision Spinner 2 is capable of outputting voltage from 3.3v to 4.8v indicated by the bottom scale.
• Rotate the bottom spin to align the red line with the bottom scale to arrive the voltage output level as marked in number. The red line on bottom spin can stay at any position along the scale between 3.3v and 4.8v to fine-tune your voltage output, despite the four locking position at 3.3v, 3.8v, 4.3v and 4.8v. Please be aware that the red line moves between 3.3v and 4.8v along the scale and do not push the red line on bottom spin to go over the 3.3v clockwise and 4.8v counter clockwise; it may damage the battery if being pushed forcefully.
• The battery indicates its current level when being pressed by displaying the following colours:
• If the button when pressed displays a WHITE colour, this indicates a remaining 60%-100% of battery power remaining.
• If the button when pressed displays a BLUE colour, this indicates a remaining 30%-60% of battery power remaining.
• If the button when pressed displays a ORANGE colour, this indicates a remaining 0%-30% of battery power remaining.
• The button flashes 15 times in mixed colour to indicate that there is no power remaining and it can no longer function without being properly charged.
• The battery also has short circuit protection, when battery is on, in case of a short circuit occurred which usually happens if the user operates wrongly during installing a cartomizer onto the battery or connecting USB charger to the battery, the button flashes three times and stop working temporarily until the conditions causing short circuit are removed
• If the power button is held for more than 8 seconds, the connection will cut to auto-protect the device.
• The battery will flash 15 times when being pressed to indicate that the battery is in need of charge.
• Charge the battery for around 4-6 hours using the 510/eGo thread USB charger provided.